HOME NEWS SCHEDULE POINTS RESULTS LINEUPS SPONSORS PHOTOS VIDEOS TRACK INFO RULES/FORMS CONTACT  
Outlaw E-Mod Rules

Print this page
Posted January 9, 2020

Click here to download this file

Click on the link to see the Outlaw E-Mod Rules 

There is also a E Mod diagram file (Outlaw E Mod Specs) that you should review.   

UPDATE FOR 2020
Driver Door Intrusion plate (Required)

A minimum 1/8" (.125”) thick magnetic steel intrusion plate on the driver’s side door bars is REQUIRED.
 Approved installations:

Welded plates- Individual plates between door bars are permitted but must be weld around the perimeter of each opening. Minimum area covered is 16inches by 26 inches.

A minimum of 16” x 26” plate bolted to fabricated 1/8” (.125”) magnetic steel tabs, welded securely to the chassis, using a minimum of eight (8) x 3/8” Allen button head bolts. A minimum of three (3) fabricated 1/8” (.125”) magnetic steel tabs and 3/8” Allen button head bolts required across top of the intrusion plate, a minimum of three (3) fabricated 1/8” (.125”)magnetic steel tabs and 3/8” Allen button head bolts required across the bottom of the plate, and one (1) fabricated 1/8”(.125”) magnetic steel tabs and 3/8” Allen button head bolt in each in the middle front and middle rear of intrusion plate.